Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

thermal properties depandent of T°

Posted 4 avr. 2011, 11:26 UTC−4 Results & Visualization Version 3.5a 3 Replies

Issam Bendaoud
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi,
i work on COMSOL 3.5a and 3.5 to make a model with heat transfer and i need to introduce thermal properties of material which change with temperature (exp: K(T)), in scalar expression i should enter the equation of K(T) :
K(T)=(6.158*T+4803.6)*(T>=293&T<873)+(-0.306*T^2+624.19*T-300709)*(T>=873&T<1173)+(-1e-4*T^3+0.654*T^2-950.08*T+463551)*(T>=1173&T<1673)

i specify that K takes different values for 293<T<873 , 873<T<1173 , 1173<T<1673
i need your help to check if my expression of K is correct or not


thank's all
3 Replies Last Post 6 avr. 2011, 09:33 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 5 avr. 2011, 01:43 UTC−4
Hi

you have a simple way to check your equation: enter it into a "new function" and plot it out.
When I try I get an error message, remains how to debug it, I would chop it up in segments, check each one by one and then add next segment, you will rapidly find out ;)

I would anyhow propose that you define it as a function of interpolation or piecewise analytical type.

--
Good luck
Ivar
Hi you have a simple way to check your equation: enter it into a "new function" and plot it out. When I try I get an error message, remains how to debug it, I would chop it up in segments, check each one by one and then add next segment, you will rapidly find out ;) I would anyhow propose that you define it as a function of interpolation or piecewise analytical type. -- Good luck Ivar
Issam Bendaoud
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 5 avr. 2011, 05:09 UTC−4
hi,
thank's for your help, i tried what told me but no way it diverge. When i put equation (+) another equation and put the temperature condition , Comsol add the equations or it separate them according to temperature ?????
hi, thank's for your help, i tried what told me but no way it diverge. When i put equation (+) another equation and put the temperature condition , Comsol add the equations or it separate them according to temperature ?????
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 6 avr. 2011, 09:33 UTC−4
Hi

I believe its because you need to write && and not &

I get the following for:

(6.158*T+4803.6)*(T>=293&&T<873)+(-0.306*T^2+624.19*T-300709)*(T>=873&&T<1173)+(-1e-4*T^3+0.654*T^2-950.08*T+463551)*(T>=1173&&T<1673)



--
Good luck
Ivar
Hi I believe its because you need to write && and not & I get the following for: (6.158*T+4803.6)*(T>=293&&T=873&&T=1173&&T

Attachments:

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content