Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Autocad

Posted 7 mars 2011, 09:37 UTC−5 Version 4.0, Version 4.1 1 Reply

Fatemeh Zarei
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello

Can I design every thing that I want in Autocad then import to the Comsol?
1 Reply Last Post 8 mars 2011, 01:32 UTC−5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 8 mars 2011, 01:32 UTC−5
Hi

it depends on the CAD modules you have. Autocad makes DXF files you might load into COMSOL for 2D (note you need 2D dxf files in x,y only for v3.5, but 3D DXF files with a Z coordinates are accepted, z value ignored, by v4)

check the main web site for the geometry file conversion / exchange capability matrix

--
Good luck
Ivar
Hi it depends on the CAD modules you have. Autocad makes DXF files you might load into COMSOL for 2D (note you need 2D dxf files in x,y only for v3.5, but 3D DXF files with a Z coordinates are accepted, z value ignored, by v4) check the main web site for the geometry file conversion / exchange capability matrix -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content