Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Eigenfrequency of statically deflected clamped-clamped beam

Posted 25 févr. 2011, 02:04 UTC−5 MEMS & Nanotechnology, MEMS & Piezoelectric Devices Version 4.0a 1 Reply

Ashwin Simha
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear All,

Could someone share detailed procedure as to how to find eigenfrequency of statically deflected clamped-clamped beam? This occurs in modeling of resonant beam pressure sensor.

Best regards,
Ashwin Simha.
1 Reply Last Post 25 févr. 2011, 14:46 UTC−5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 25 févr. 2011, 14:46 UTC−5
Hi

if it's the stressed eigenfrequencies you are looking for, you need to load the beam, perform a stationary analysis, then store the solution, and use the stored solution as starting point for the eigenfrequency analysis.

You set this up in the solver sequence

--
Good luck
Ivar
Hi if it's the stressed eigenfrequencies you are looking for, you need to load the beam, perform a stationary analysis, then store the solution, and use the stored solution as starting point for the eigenfrequency analysis. You set this up in the solver sequence -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content