Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Skin Friction Coefficient in the Turbulent flow over a backward-facing step.

Posted 21 févr. 2011, 07:24 UTC−5 Fluid & Heat, Computational Fluid Dynamics (CFD), Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.0 2 Replies

Yerko Luppi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi!

My name is Yerko Luppi, i live in Chile and i'm studying mechanical engineering. This is my last year.
I'm learning about CFD and i started with the 2D Backstep Model www.comsol.com/showroom/documentation/model/228/

My teacher wants validate the model by the Skin friction coefficient (using the Wilcox's graphics).
The problem is that i don't know how to get to this coefficient in comsol.
The Skin friction coefficient is www.cfd-online.com/Wiki/Skin_friction_coefficient

How can i do it?

I hope someone can help me, I'll be very grateful.

Best Regards from Chile :)
2 Replies Last Post 10 janv. 2012, 01:13 UTC−5
COMSOL Moderator

Hello Yerko Luppi

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Dan Forsström
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 9 janv. 2012, 17:01 UTC−5
HI,

I read your request on cfd and skin-surface problem. I have a similar problem but no solution.
Did you solve the problem?

Regards,
Dan Forsström
Polymira AB
Sweden
HI, I read your request on cfd and skin-surface problem. I have a similar problem but no solution. Did you solve the problem? Regards, Dan Forsström Polymira AB Sweden
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 10 janv. 2012, 01:13 UTC−5
Hola Chile

Well I haven't studied that part of Physics recently, I would have to dig into the books again, but there are a few things you can easily do to get some clues:

1) you can plot the local stress tensor i.e. normal and tangential to your surface, even double your solid volume by a second fluid volume slightly greater than the solid such that you get the shear forces somewhat above the no-slip contact region

2) for the standard FSI it's not that interesting, but for a sphere or cylinder, or ellipsoid, or a "wing" in a fluid flow you can use the polar plot to get a 360° view (add a polar plot, add a line graph and use atan2(y,x) as equation per line graph, then select variables like spf.K_stressx, or spf.T_stressx

3) use the data set cut line to see how these components change with separation distance from the FSI boundary

greetings from the north
--
Have fun Comsoling
Ivar
Hola Chile Well I haven't studied that part of Physics recently, I would have to dig into the books again, but there are a few things you can easily do to get some clues: 1) you can plot the local stress tensor i.e. normal and tangential to your surface, even double your solid volume by a second fluid volume slightly greater than the solid such that you get the shear forces somewhat above the no-slip contact region 2) for the standard FSI it's not that interesting, but for a sphere or cylinder, or ellipsoid, or a "wing" in a fluid flow you can use the polar plot to get a 360° view (add a polar plot, add a line graph and use atan2(y,x) as equation per line graph, then select variables like spf.K_stressx, or spf.T_stressx 3) use the data set cut line to see how these components change with separation distance from the FSI boundary greetings from the north -- Have fun Comsoling Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content