Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
No plot visualization of snapshot in Comsol Multiphysics 4.1
Posted 17 févr. 2011, 07:59 UTC−5 Results & Visualization Version 4.1 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I have a solved geometry in 3D (using Comsol Multiphysics 4.1) and would like to take a snapshot of a slice plot. When zooming in, the plot is visible in the "Graphics" window. However, when I take a snapshot and have a look at the saved file only a few boundaries of the geometry are visible. I have done the same for other slice plots which worked perfectly.
Has anybody an idea how to solve this problem?
I greatly appreciate your help.
Christoph
I have a solved geometry in 3D (using Comsol Multiphysics 4.1) and would like to take a snapshot of a slice plot. When zooming in, the plot is visible in the "Graphics" window. However, when I take a snapshot and have a look at the saved file only a few boundaries of the geometry are visible. I have done the same for other slice plots which worked perfectly.
Has anybody an idea how to solve this problem?
I greatly appreciate your help.
Christoph
1 Reply Last Post 21 févr. 2011, 06:19 UTC−5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hello,
I've solved the problem myself. I adjusted the resolution to the right values. Then it worked instantly. I write this to let everybody know.
Regards,
Christoph
I've solved the problem myself. I adjusted the resolution to the right values. Then it worked instantly. I write this to let everybody know.
Regards,
Christoph