Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Piezoelectric Simulation Without MEMS Module
Posted 31 mai 2016, 12:30 UTC−4 Version 5.1 1 Reply
Please login with a confirmed email address before reporting spam
Is it possible to simulate piezoelectric materials without the MEMs Module and just the piezoelectric material option under structural mechanics?
I have done some basic simulations of cantilevers and beams but not piezoelectric. Any insights will be helpful.
I have done some basic simulations of cantilevers and beams but not piezoelectric. Any insights will be helpful.
1 Reply Last Post 31 mai 2016, 15:46 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Hello Jason,
There are capabilities for piezoelectric modeling in the MEMS Module, the Structural Mechanics Module and the Acoustics Module. Some of those capabilities are in common to all three, others are unique to the MEMS Module.
You can compare those capabilities in the Specification Chart ( www.comsol.com/products/specifications/ ) by searching for "piezo".
Best regards,
Jeff
There are capabilities for piezoelectric modeling in the MEMS Module, the Structural Mechanics Module and the Acoustics Module. Some of those capabilities are in common to all three, others are unique to the MEMS Module.
You can compare those capabilities in the Specification Chart ( www.comsol.com/products/specifications/ ) by searching for "piezo".
Best regards,
Jeff