Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Internal fluid-fluid boundary issue

Posted 22 nov. 2014, 08:00 UTC−5 Fluid & Heat, Computational Fluid Dynamics (CFD) Version 4.4 0 Replies

Lefteris Kosmidis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello all,
Inexperienced comsol user here. So I have a 3-d model of a cylinder. In the lower half of the cylinder there is water while in the upper we have air. Air is rotating around the cylinder due to an inlet and an outlet. My problem is that I want to have an interior boundary on the air-water surface that is as follows: ux_air=ux_water and uy_air=uy_water and w_z=0 so that there is no mixing between air and water.
Do you have any suggestions on how this could be applied?

Thanks in advance,
Lefteris
0 Replies Last Post 22 nov. 2014, 08:00 UTC−5
COMSOL Moderator

Hello Lefteris Kosmidis

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content