Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Error in the demo model ?

Posted 26 juin 2013, 08:04 UTC−4 Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.3b 3 Replies

Mika Maaspuro
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

There is a demo example "Thermoelectric_leg.mph" available in the Multiphysics installation and it locates
in directory c:\program files\COMSOL\COMSOL43b\demo\builder\thermoelectric_leg.mph". It uses model
ThermoelectricEffect.mphphb in the same directory. Opening the model results the following error message:

"No dependent variable can be found for identifier "temperature"
-Feature:Domain Feature 2 (ThermoelectricModel)

Obviously a small error in the model, but how it can be corrected ?
3 Replies Last Post 26 nov. 2013, 17:38 UTC−5
Anders Ekerot
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 4 juil. 2013, 03:39 UTC−4
Hi Mika,

Please apply the COMSOL 4.3b update 1 if you have not already done so:
www.comsol.eu/support/updates/comsol43bp1/

Alternatively, in the Physics Builder Manager, first remove and then re-add the ThermoelectricEffect.mphphb file to Archive Browswer>Development Files.

Regards,
Anders
Hi Mika, Please apply the COMSOL 4.3b update 1 if you have not already done so: http://www.comsol.eu/support/updates/comsol43bp1/ Alternatively, in the Physics Builder Manager, first remove and then re-add the ThermoelectricEffect.mphphb file to Archive Browswer>Development Files. Regards, Anders
Mika Maaspuro
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 8 juil. 2013, 15:43 UTC−4
Hi Anders,

thank you for the answer. It solved the problem.

best regards,

Mika
Hi Anders, thank you for the answer. It solved the problem. best regards, Mika
Salvatore Savo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 26 nov. 2013, 17:38 UTC−5
great, I would have wasted a lot of time if I didn't read this first.
thanks a lot.
great, I would have wasted a lot of time if I didn't read this first. thanks a lot.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content