Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Arrange Continuity between Thin Shells and Solids in an assembly - HT

Posted 25 juin 2013, 12:47 UTC−4 Heat Transfer & Phase Change, Geometry, Mesh, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.3a, Version 4.3b 1 Reply

Alexander Warth
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

according to this older thread: www.comsol.com/community/forums/general/thread/14702/ I finally established a proper simulation of combined thin shells and solids heat transfer (union). But as I change the Geometry import finalization from union to assembly and set the continuity on the automatic builded identity pairs then there appears an error message during the solving process. Obviously the contact properties aren't set correct at the transition of thin shell to solid.

Could someone give me a short idea how I could establish a working contact continuity between thin shells and solids

I would be really glad if someone could help me.

Best Regards
Alex
1 Reply Last Post 25 juin 2013, 14:42 UTC−4
Alexander Warth
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 25 juin 2013, 14:42 UTC−4
...I was totally confused - thermal contact is completely different to (thermal) continuity. Wrong translation of the german words in my mind. Sorry for that. I corrected the request. Despite being blind, I still need help with this issue.

Thanks,
Alex
...I was totally confused - thermal contact is completely different to (thermal) continuity. Wrong translation of the german words in my mind. Sorry for that. I corrected the request. Despite being blind, I still need help with this issue. Thanks, Alex

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content