Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Modeling a 3D Waveguide that Support Multiple Modes

Posted 23 févr. 2024, 13:27 UTC−5 RF & Microwave Engineering, Wave Optics Version 6.1 4 Replies

Manal Shlebik
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear All

I am simulating a 3D waveguide that supports multiple modes at higher frequencies. I am following the instruction written in this blog: https://www.comsol.com/blogs/modeling-waveguides-that-support-multiple-modes/

Injecting the TE10 and TE20 modes in my model produce the following error message:

  • Feature: Stationary Solver 1 (sol1/s1) Failed to find a solution. Singular matrix.

For mesh case 0 there are 1 void equations (empty rows in matrix) for the variable comp1.emw.S3x. at coordinates: (0,0,0), ... For mesh case 0 there are 1 void equations (empty rows in matrix) for the variable comp1.emw.S4x. at coordinates: (0,0,0), ... and similarly for the degrees of freedom (empty columns in matrix). Returned solution is not converged. Not all parameter steps returned.

Would you please help me with this? Could you please show me, if there is any other method, how to inject multiple modes into a silicon waveguide? I am using RF and waveOptics modules.

Thanks in advance, Manal

4 Replies Last Post 26 févr. 2024, 19:38 UTC−5
Dave Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 months ago 23 févr. 2024, 14:49 UTC−5
Updated: 9 months ago 23 févr. 2024, 14:49 UTC−5
  1. Post your model.
  2. Which is it, RF or Wave optics??
1. Post your model. 2. Which is it, RF or Wave optics??
Manal Shlebik
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 months ago 23 févr. 2024, 15:04 UTC−5
Updated: 9 months ago 24 févr. 2024, 10:35 UTC−5

Dear Dave

Thanks for your quick responce,

It is RF like an example on the blog: https://www.comsol.com/blogs/modeling-waveguides-that-support-multiple-modes/

I have attached my model and had to clear the result and Mesh to reduce the size file.

Thanks,

Dear Dave Thanks for your quick responce, It is RF like an example on the blog: https://www.comsol.com/blogs/modeling-waveguides-that-support-multiple-modes/ I have attached my model and had to clear the result and Mesh to reduce the size file. Thanks,
Dave Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 months ago 23 févr. 2024, 15:55 UTC−5
Updated: 9 months ago 23 févr. 2024, 15:55 UTC−5

Since this is a clad waveguide, the mode launched at the input port is not a TE01 waveguide mode. When you select a rectangular port the TE01 mode Comsol tries to use satisfies the boundary conditions of a metal-clad waveguide. Clearly that isn't the right mode shape whether you select the entire face or just the silicon face.

To solve this problem you need to do a boundary mode analysis for the ports first and then select "numeric" for the port type. I think you can find examples of this on the Comsol website.

I strongly recommend that you set up and solve a uniform waveguide problem with a single input and output first.

Since this is a clad waveguide, the mode launched at the input port is not a TE01 waveguide mode. When you select a rectangular port the TE01 mode Comsol tries to use satisfies the boundary conditions of a metal-clad waveguide. Clearly that isn't the right mode shape whether you select the entire face or just the silicon face. To solve this problem you need to do a boundary mode analysis for the ports first and then select "numeric" for the port type. I think you can find examples of this on the Comsol website. I strongly recommend that you set up and solve a uniform waveguide problem with a single input and output first.
Manal Shlebik
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 months ago 26 févr. 2024, 19:38 UTC−5
Updated: 9 months ago 1 mars 2024, 18:29 UTC−5

Dear Dave

Many thanks for your reply,

Your help is much appreciated, Manal

Dear Dave Many thanks for your reply, Your help is much appreciated, Manal

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content