Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Post-buckling does not converge
Posted 19 mai 2022, 09:19 UTC−4 Structural & Acoustics, Structural Mechanics 1 Reply
Please login with a confirmed email address before reporting spam
Hello, everyone I am trying to do a simulation about the post-buckling of a cylinderical shells subjected to axial compression by nonlinear steady-state analysis. But when calculated near the buckling load, the results do not converge, so that post-buckling results cannot be obtained. I want to know how to get the complete load displacement curve as we use the riks method in ABAQUS.
Please login with a confirmed email address before reporting spam
A good place to start is to look at these models:
https://www.comsol.com/model/postbuckling-analysis-of-a-hinged-cylindrical-shell-10257
https://www.comsol.com/model/spherical-cap-with-central-point-load-67161
Henrik Sönnerlind
COMSOL