Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Induction Heating 3-D simulation in COMSOL 4.2

Posted 20 juin 2012, 16:36 UTC−4 Electromagnetic Heating 5 Replies

Phuong Tran Gia
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,
I'm trying to simulate the Induction Heating in 3-D simulation. Could you please tell me the components of Induction Heating (such as: Sufface Current, Ampere's Law, External Sufface Current Density...) which are necessary to be added in the 3-D model?

Thanks in advance.
With the best.
Phuong.
5 Replies Last Post 30 mai 2013, 14:48 UTC−4
Phuong Tran Gia
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 20 juin 2012, 21:41 UTC−4
Does anybody help me to solve that problem?
Does anybody help me to solve that problem?
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21 juin 2012, 00:50 UTC−4
Hi

have you tried to update your model library and check the examples therein, there should be at least one there

--
Good luck
Ivar
Hi have you tried to update your model library and check the examples therein, there should be at least one there -- Good luck Ivar
Phuong Tran Gia
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21 juin 2012, 01:16 UTC−4
Hi Ivar,

Thanks for your response, I tried to find it from library, but I could not find the Induction heating in 3-D simulation. I was able to simulate it in 2-D.

Do you have any suggestions for me?
Hi Ivar, Thanks for your response, I tried to find it from library, but I could not find the Induction heating in 3-D simulation. I was able to simulate it in 2-D. Do you have any suggestions for me?
jay
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 6 nov. 2012, 23:48 UTC−5

hi... i also started working on 3D induction heating... i dont know how to exite coil... im getting wrong results for 2D also. would u please help me by sending ur 2D model. my mail id is jayaprakash2020@gmail.com

waiting for u reply...
--
jay
hi... i also started working on 3D induction heating... i dont know how to exite coil... im getting wrong results for 2D also. would u please help me by sending ur 2D model. my mail id is jayaprakash2020@gmail.com waiting for u reply... -- jay
Patrice Gouin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 30 mai 2013, 14:48 UTC−4
Hi Phuong,

Did you succeed? I'm also trying to lead some 3D induction heating.
I coupled Magnetic Fields and Heat Transfert in Solids, but I always get an error of divergence...

Thanks for sharing.

Patrice
Hi Phuong, Did you succeed? I'm also trying to lead some 3D induction heating. I coupled Magnetic Fields and Heat Transfert in Solids, but I always get an error of divergence... Thanks for sharing. Patrice

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content