Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Novel Solar Concentration System

Please login with a confirmed email address before reporting spam

Hello Everyone

I'm doing my thesis paper , the title of my thesis is optimization of novel solar concentration system . I'm a new user for comsol , and actually I need a strong support for working on it. I have to design the system , and study the optimum orientation and the direcrtion of the ray's which wil provide us the maximum power. So, from where do I have to start and how can I build the system and study it ??

Appreciate your support


2 Replies Last Post 19 avr. 2019, 15:32 UTC−4
Robert Koslover Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 19 avr. 2019, 14:59 UTC−4

It isn't obvious to me that Comsol Multiphysics is the best tool for your task. Other people report using Monte-Carlo ray-tracing methods to do this kind of work. If you haven't already read the literature about using those methods, you probably should. Good luck.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
It isn't obvious to me that Comsol Multiphysics is the best tool for your task. Other people report using Monte-Carlo ray-tracing methods to do this kind of work. If you haven't already read the literature about using those methods, you probably should. Good luck.

Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 19 avr. 2019, 15:32 UTC−4

Hello Baraah,

This blog and the links at the end of it, as well as this model can get you started on modeling a solar concentration system with the Ray Optics Module.

Best,

Jeff

-------------------
Jeff Hiller
Hello Baraah, This [blog](https://www.comsol.com/blogs/an-analysis-of-caustic-surface-generation-at-the-vdara-hotel/) and the links at the end of it, as well as this [model](https://www.comsol.com/model/solar-dish-receiver-19227) can get you started on modeling a solar concentration system with the Ray Optics Module. Best, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.