Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

'There is no feature 'mod1_Pmfinl1'

Please login with a confirmed email address before reporting spam

I am trying to load a working model I had previously created and now am getting this error,'There is no feature 'mod1_Pmfinl1' below it reads ' Error in automatic sequence generation'. Does anyone know what this means or how to fix this?
Thanks


2 Replies Last Post 3 août 2011, 10:48 UTC−4
Daniel Smith COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2 août 2011, 17:53 UTC−4
Hi, I believe this problem was fixed in the update 2 for V4.2. If you download the latest update this problem should go away. See the CFD Module section of the COMSOL 4.2 Update 2 release notes:

www.comsol.com/support/updates/comsol42p2/

/ Dan
Hi, I believe this problem was fixed in the update 2 for V4.2. If you download the latest update this problem should go away. See the CFD Module section of the COMSOL 4.2 Update 2 release notes: http://www.comsol.com/support/updates/comsol42p2/ / Dan

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 3 août 2011, 10:48 UTC−4
Great, this was the problem.
Thanks a lot.
-Lucas
Great, this was the problem. Thanks a lot. -Lucas

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.