Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

if condition in variable definitions

Posted 12 avr. 2011, 10:36 UTC−4 Parameters, Variables, & Functions Version 4.1 6 Replies

Haolin Zhu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I was wondering how to implement if conditions in variable definitions?

For example, if I wanted to define a variable a, and it is based on a condition of b, which has been defined as another variable.

a = 1 if b>0
a = 3 if b<=0

I was wondering how to implement this?

And another situation is, I have already defined a variable M, then another variable depends on M:
c = M^2 + 5 when M<0.5
c = 2*M/(M+1)^2 when M>=0.5

Could anyone please help with this? Thanks a lot in advance!

6 Replies Last Post 19 avr. 2011, 10:42 UTC−4
Edgar Kaiser
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 12 avr. 2011, 10:46 UTC−4
Hi,

you can multiply boolean expressions:

3*(b<=0) + 1*(b>0) behaves as desired for a.

The expression for c would then be:

(M^2 + 5)*(M<0.5) + (2*M/(M+1)^2)*(M>=0.5)

Cheers
Edgar
Hi, you can multiply boolean expressions: 3*(b0) behaves as desired for a. The expression for c would then be: (M^2 + 5)*(M=0.5) Cheers Edgar
Dhanashri Joglekar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 15 avr. 2011, 06:32 UTC−4
Hi ,

I have a question in connection with this.

I wish to add a boolien expression, which should use time variable. I want to know, how the time is accessed? What is the variable name?
Hi , I have a question in connection with this. I wish to add a boolien expression, which should use time variable. I want to know, how the time is accessed? What is the variable name?
Edgar Kaiser
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 15 avr. 2011, 06:39 UTC−4
Hi,

I think the time variable is always "t".

Cheers
Edgar
Hi, I think the time variable is always "t". Cheers Edgar
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 16 avr. 2011, 02:45 UTC−4
Hi

The time in COMSOL is "t" (in seconds) but it is not formally declared before you call a transient solver, therefore when you mix stationary followed by a time series and you want to debug such a solution with variables depending on "t" these might flag an error.

To avoid this, add a "Parameter" t = 0[s], this will be overwritten by COMSOL once the time solver comes up
Sometimes it is better to use a value slightly different from "0" to avoid all =0 in your variables, this is all model and case dependent ;)

--
Good luck
Ivar
Hi The time in COMSOL is "t" (in seconds) but it is not formally declared before you call a transient solver, therefore when you mix stationary followed by a time series and you want to debug such a solution with variables depending on "t" these might flag an error. To avoid this, add a "Parameter" t = 0[s], this will be overwritten by COMSOL once the time solver comes up Sometimes it is better to use a value slightly different from "0" to avoid all =0 in your variables, this is all model and case dependent ;) -- Good luck Ivar
Dhanashri Joglekar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 19 avr. 2011, 00:55 UTC−4
Hi,

Thanks to both of you!

Dhanashri.
Hi, Thanks to both of you! Dhanashri.
Haolin Zhu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 19 avr. 2011, 10:42 UTC−4
Thank you so much!
Thank you so much!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content