Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to implement this trick (dealing with large mesh deformation in ALE) ?
Posted 8 mars 2011, 14:41 UTC−5 Version 4.0 1 Reply
Please login with a confirmed email address before reporting spam
In comsol users' guide, in "Limitation of the ALE Method", p555 (v4.0), p647(v4.1), an trick was given to deal with large mesh deformation, i.e., introducing extra boundaries with explicit deformation inside the domains. But I don't understand it, can anybody explain this trick in detail, it would be better if you can give an example. Thank you!
1 Reply Last Post 8 mars 2011, 15:39 UTC−5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
Often, when using ALE you have a small object moving with a large volume of fluid around.
This means often that the moving mesh is highly deformed very locally around the object, even such that you get inverted elements in this region, but it hardly defoms some short distance from the flexible body.
Ideally you should try to get the mesh to deforme rather regularly all around.
So all depending on the model symmetry, you can sometimes add some intenal boundaries (fixed or moving with the some flexing domain/boundary) such to better distribute the mesh deformatin (reduce the mesh deformation gradient). That is basically the principle of the "trick"
--
Good luck
Ivar
Often, when using ALE you have a small object moving with a large volume of fluid around.
This means often that the moving mesh is highly deformed very locally around the object, even such that you get inverted elements in this region, but it hardly defoms some short distance from the flexible body.
Ideally you should try to get the mesh to deforme rather regularly all around.
So all depending on the model symmetry, you can sometimes add some intenal boundaries (fixed or moving with the some flexing domain/boundary) such to better distribute the mesh deformatin (reduce the mesh deformation gradient). That is basically the principle of the "trick"
--
Good luck
Ivar