Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to use the solution of Study 1 to Study 2? (Initial Condition of the Study 2 will be the final condition of Study 1)

Posted 25 janv. 2016, 13:03 UTC−5 Version 4.4 4 Replies

Sudipta Saha
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello! I am modeling a conjugate heat transfer problem. It is a closed channel flow of air and a thin liquid film at the bottom surface. In comsol model, first I like to add study for steady state case with no liquid film. Then I like to add the water film and run a time dependent in-transient case. For the 2nd Study, I need to solve for energy, and it would take the velocity profile of the steady state solution as the initial condition.
My first question is, to add liquid film, do I need to add New Component in my comsol? and the second question is, how can I use the steady state solution for previous study to initiate the second study?
4 Replies Last Post 27 janv. 2016, 06:24 UTC−5
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 26 janv. 2016, 04:36 UTC−5
Hi

Loot at the attachment.

BR
Lasse
Hi Loot at the attachment. BR Lasse

Attachments:

Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 26 janv. 2016, 04:38 UTC−5
Sorry, in the "Method" box ,an option "Solution" must be selected.
Sorry, in the "Method" box ,an option "Solution" must be selected.
Sudipta Saha
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 26 janv. 2016, 14:47 UTC−5
I have done this but it is showing this message:
please find the attachments. I have also attached the comsol file.
In study 1 I need to solve only the Laminar Flow (spf). So on study 1, Step1Stationary, I only checked the box for spf and unchecked the conjugate heat transfer (nitf).
Then study 2, I have solved for Conjugate heat transfer (nitf) by unchecking the spf. and checked the ''Initial values of variables solved for'' and selected Study 1 for study option. but it shows error. Would you please have a look. Thank you.
I have done this but it is showing this message: please find the attachments. I have also attached the comsol file. In study 1 I need to solve only the Laminar Flow (spf). So on study 1, Step1Stationary, I only checked the box for spf and unchecked the conjugate heat transfer (nitf). Then study 2, I have solved for Conjugate heat transfer (nitf) by unchecking the spf. and checked the ''Initial values of variables solved for'' and selected Study 1 for study option. but it shows error. Would you please have a look. Thank you.
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 27 janv. 2016, 06:24 UTC−5
Hi

I solved your model with version 5.2 without any trouble. In Initial values of variables solved for, I changed Selection to Automatic.

Did you get the warning "This multiphysics interface is obsolete and will be removed in a future version.
A new version of the multiphysics coupling is available from the Add Physics window. "?

BR
Lasse
Hi I solved your model with version 5.2 without any trouble. In Initial values of variables solved for, I changed Selection to Automatic. Did you get the warning "This multiphysics interface is obsolete and will be removed in a future version. A new version of the multiphysics coupling is available from the Add Physics window. "? BR Lasse

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content