Consultez les proceedings de la Conference COMSOL 2024
We use finite elements simulations in order to study the fluid flow behavior in a chamber of a preconcentrator. We realized that most part of the fluid does not affect our preconcentrator because it is going out the chamber at high distance above it and parallel to the preconcentrator. ... En savoir plus
Prototype Fast Breeder Reactor (PFBR) is a 500MWe, sodium cooled, pool type, mixed oxide (MOX) fuelled reactor. Sodium flow measurement in various loops of the reactor is of prime importance from the operational and safety aspects. To measure the flow of electrically conducting sodium in ... En savoir plus
The present work reports the fabrication process of micro lens for pinhole cameras, modeled using COMSOL Multiphysics®, by satisfying the wetting properties. Wetting is a change in contact angle between the liquid and solid surface area. The wetting properties are clearly understood in ... En savoir plus
Finite element analysis has been used to model the ultrasonic wave propagation both in a custom made transducer and in the tested polymer sample. The model consists of acoustic (passive elements) and electroacoustic (active elements) transmission lines. The simulation of the acoustic ... En savoir plus
The radiation dose produced by an x-ray CT scanner to the patient is conventionally referenced to measurements performed by an ionization chamber in a phantom. On a fundamental level, the radiation absorbed dose, J/kg, can be determined directly by the temperature rise in the absorbing ... En savoir plus
The next-generation of Extremely Large Telescopes adaptive optics systems require high-order, long-stroke, quite large deformable mirrors. Higher forces and greater actuator densities than the ones provided by the current technology are needed, still maintaining the severe accuracy and ... En savoir plus
Electrochemical etching of silicon (anodization) is a process that can be used for etching of forms of nearly arbitrary shapes. The difficulty of applying the process for mass production is in the many parameters influencing the process, such as electrolyte concentration and temperature, ... En savoir plus
Lithium microbatteries are replacing conventional power sources in many microsystems areas such as wireless sensors and biomedical monitors. In many of these applications, compact models of micro batteries are needed both at the microsystems design stage and at the real-time power ... En savoir plus
The simulation of the piezoelectric actuation of the micro-cantilever is presented. Lead Zirconate Titanate (PZT) was chosen for the device fabrication design, due to its thin film processing flexibility. Four layers compose the cantilever structures presented in this work: PZT ... En savoir plus
The article presents the process of verification of the passive magnetic bearing by the Comsol Multiphysic program. There is shown construction of the radial passive magnetic bearing PMB60x85x20-5, which was designed in the Military University of Technology. The distribution of the ... En savoir plus