Articles techniques et présentations

随着电子通信的不断发展和普及，对声表面波器件（SAW）的性能要求也逐渐提升。在器件不断变小，工作环境的不断恶劣的情况下，声表面波器件也需要更高的频率、更好的稳定性能以及更大的带宽等新的提升。对于传统的氮化铝/金刚石结构来说已经无法满足更高频率，更大带宽的要求，所以本文为了能设计具有更高的相速度和机电耦合系数的声表面波器件，使用comsol 有限元仿真中的MEMS模块，对掺钪的氮化铝薄膜进行了研究，通过实验证明氮化铝钪作为压电材料时能具有更好的特性。通过研究在四种激励模式下氮化铝/金刚石结构与氮化铝钪/金刚石结构随着压电材料厚度的变化 ... En savoir plus

In this contribution, we simulate the optical response of piezoelectric planar optical microcavities (POMCs) under the modulation introduced by a propagating surface acoustic wave (SAW). The physical picture of the model is shown in Figure 1. A metallic interdigital transducer (IDT) is ... En savoir plus

This work enunciates the principles of SAW design from a physical perspective, examining the standard engineering modelling assumptions in some detail. An integral form analytical expression based on 2D elastic isotropic theory is validated against a COMSOL Multiphysics® simulation, ... En savoir plus

The Surface Acoustic Wave (SAW) linear motor was studied which is developed utilizing the friction principle for driving. The principle says that, when a slider is placed on the Rayleigh waves generated on a stator, the slider moves in reverse direction of the wave due to friction ... En savoir plus

Vibrating mechanical tank components, such as quartz crystals and surface acoustic wave (SAW) resonators with Q’s in the range of 10e3–10e6, are widely used to implement high-Q oscillators and band pass filters in the radio frequency (RF) and intermediate frequency (IF) stages of ... En savoir plus

Finite element modelling of surgical transducers has been performed and is described. Ultrasonic transducers vibrating at around 25 kHz are used in orthopaedic surgery to cut bone. The high acoustic impedance of the metal blades used in these devices couples energy more efficiently to ... En savoir plus

Silicon solar cells are produced in a series of different process steps in which wet-chemical etching and rinsing steps have a considerable influence on the quality of the wafers. Etching baths are used for surface structuring or intended etch back. Examples therefore are texturing, ... En savoir plus

In this work, we seek to simulate SAWs for a better understanding and to benchmark the currently available cloud computing possibilities of COMSOL Multiphysics® software. By using the MEMS module we demonstrate 3D models with reduced geometry to achieve principle information about the ... En savoir plus

The ongoing trend towards miniaturization, higher integration as well as cost efficiency will make it necessary to investigate a new assembly method for micro components. In this paper, a novel method of fluidic-based micro assembly is presented. A self-assembly effect which is caused by ... En savoir plus

BAW (Bulk Acoustic Wave) resonators are rapidly growing highly integrated devices with wide range of applications in wireless domains. Fabrication of thin film BAW resonators are highly challenging over material selections and measures of materials. RF properties of BAW resonators ... En savoir plus