- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Transport of microorganisms through porous media governs many phenomena in bioremediation of environmental pollution problems and microbial enhanced oil recovery. The aim of this work is to investigate the effects of some transport parameters on breakthrough curves as well as on spatial ... En savoir plus
We present the results of full-waveform time-dependent finite-element modelling of coupled seismoelectromagnetic wave propagation in fluid-saturated porous media. To describe the seismoelectric response of the system a new set of equations is developed which couple the poroelasticity ... En savoir plus
The results of two thermal response tests recently performed on two vertical borehole heat exchangers (BHEs) are presented. The BHEs have the same cross section and a depth of 100 m and 120 m respectively. The evaluation of the thermal properties of the ground and grout are performed by ... En savoir plus
Disposal in deep clay geological formations is one of the promising options for disposal of high-level radioactive waste. Yet, they can generate considerable amounts of heat as a side effect of radioactive decay. This paper shows how COMSOL Multiphysics has been used to evaluate the ... En savoir plus
An estimation method, known as Thermal Response Test, of the soil thermal properties necessary to the design of a borehole geothermal energy storage system is discussed in relation to its application to the ground having non–homogeneous composition. The governing equations of the ... En savoir plus
The bentonite barrier is an essential part of safe nuclear waste repository in granite bedrock. In this work COMSOL Multiphysics® is applied to modeling Thermo-Hydro-Mechanical-Chemical (THMC) processes taking place in a bentonite buffer. The system is studied in different geometries, ... En savoir plus
Wettability affects two-phase displacements in porous media by determining the microscopic distribution of fluids in pore spaces. The impact of wettability on transport properties at macro-scales has been widely addressed in literature; however a deeper understanding of wettability ... En savoir plus
Energy piles, i.e. heat exchangers located within the foundation piles of buildings, are used for heating of cooling purposes. Although the absolute values of deformations and temperature gradients are low or moderate, the entire setting can be influenced by thermo-hydro-mechanical ... En savoir plus
Vertical circulation wells (VCWs) are well system consisting dual-screened sections allowing synchronous extraction and injection of groundwater in a single borehole. Vertical circulation flow or dipole flow is induced. This type of well has been widely used for in-situ remidiation, ... En savoir plus
The use of high-resolution topography in the finite element model demonstrates that deformation from a shallow pressure source can be dramatically affected by overlying relief, not only in magnitude, but also in azimuth. This result is significant as it allows traditionally anomalous ... En savoir plus