Consultez les proceedings de la Conference COMSOL 2024
As a sustainable urban transport system, the tricycle might represent an adaptive mobility vehicle used to transport people and bulk load. This transport system must warranty the security of its end users, then experimental and modeling works are very useful tools in order to evaluate ... En savoir plus
In this study, based on a bank protection structure engineering at Yangtze River, a 2D water-soil coupling model is established, in which the influence of water level fluctuation on groundwater seepage and soil shear strength is considered. According to the water level measured data of ... En savoir plus
A wind tunnel experiment was modelled using COMSOL Multiphysics® CFD software. A k-ω coupled turbulence model was considered including the Brinkman equation for stationary air flow through a porous vegetation section. En savoir plus
Based on the heat transfer and seepage theory in porous media, a 2D cross section of a horizontal AGF project is selected and a numerical model is set up, which is based on full coupling of temperature and flow fields by combining physical interfaces of Darcy's Law and Heat Transfer in ... En savoir plus
Aqueous polymers used for enhanced oil recovery (EOR) application is considered a complex fluid. It can exhibit Newtonian and Non-Newtonian behavior depending on the velocity or the stresses that it is submitted during the flooding process. Therefore, the polymer flooding project ... En savoir plus
This paper presents a multiphysics model to the convective, conductive and radiative heat transfer for the thermoelectric modules (TEMs), which are used to convert heat flux into electrical current. The model basically consists of heat transfer in solids, heat transfer in thin shells, ... En savoir plus
In a first approach towards application of the magnetic frequency mixing technique to microfluidic structures, microplanar coils have to be designed along with sample reservoir. For this, a COMSOL Multiphysics® electrical model along with an analytical calculation is used in order to ... En savoir plus
The successful implementation of a high-efficient latent heat storage system necessitates an appropriate experimental approach to investigate and quantify the variations of the Phase Change Material (PCM) thermal properties caused by its aging, as well as its potential demixing induced ... En savoir plus
The recent years have witnessed a growing interest in the possibility of enhancing the information transfer per unit bandwidth by exploiting the Orbital Angular Momentum (OAM) of light in both free-space and guided scenarios. In the proposed paper, the propagation of suitable OAM ... En savoir plus
The transducer's construction used for current measurement in medium voltage power lines for current values kA is shown. The transducer involves magnetic circuit with a gap in which a MEMS structure with a movable cantilever is placed. The beam is made of silicon with a NiFe layer. The ... En savoir plus