Verifying the Friis Transmission Equation with FEM–BEM Coupling
Application ID: 113271
In this model, the transmitter (microstrip patch) and receiver (Yagi–Uda) antennas are modeled simultaneously in the FEM domain and are coupled with FEM–BEM coupling. The results are compared with the analytical Friis transmission formula.
In detail, the emw and emw2 interfaces find out far-field responses for given antennas using the Far-Field calculation feature. Further, the emw3 interface couples with the embe interface to model microstrip patch and Yagi-Uda antennas as a transmitter and receiver, respectively, forming a typical line-of-site (LoS) communication system.
In analysis, the Friis transmission formula is verified with results for varying separation and azimuth angle using a parametric sweep.
Learn more about this model in the blog post "Verifying Friis Transmission Equation with FEM–BEM Coupling".
This model example illustrates applications of this type that would nominally be built using the following products:
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Grille des Spécifications and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.