Cavity Flow Noise
Application ID: 105021
Flow over a cavity and the tonal noise generated is a typical flow noise source in piping systems that have valves and other cavities. This tutorial model represents a simple case of cavity flow noise in a ducted system. The model is set up based on an example from Lafon et al.
The current tutorial model shows the steps involved in a flow-induced noise simulation in COMSOL Multiphysics® using functionality from the Acoustics Module and the CFD Module.
It should be noted that the mesh resolution used for the LES flow is not fine enough to resolve all the details of the flow. This choice has been made to ensure that the model can be solved relatively fast on a moderate strength cluster and that the output data is not too large. This in turn means that the simulated acoustic response deviates to some degree from the reference data from Lafon et al.
Reference: P. Lafon, S. Caillaud, J. P. Devos, C. Lambert, "Aeroacoustical coupling in a ducted shallow cavity and fluid/structure effects on a steam line," J. Fluid Struct., 18 (2003).
This model example illustrates applications of this type that would nominally be built using the following products:
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Grille des Spécifications and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.