Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Smoothing the graph

Posted 17 sept. 2015, 01:29 UTC−4 Version 4.4 3 Replies

Aamir Qamar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello, could anyone help how to smooth the graph. I have attached the graph that is the derivative of magnetic flux density with respect to phi. I tried my best to make the graph smoother by increasing the number of mesh elements and making the recovery everywhere in the quality section of the point graph it worked alot but still its not completely smooth. The graph is attached...

Attachments:

3 Replies Last Post 20 sept. 2015, 07:44 UTC−4
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 17 sept. 2015, 05:24 UTC−4
Hi,

derivatives have a tendency to be noisy. You can try to increase the discretization from quadratic to cubic. This helps sometimes, but of course at the price of higher memory demand and longer computation.

Cheers
Edgar

--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Hi, derivatives have a tendency to be noisy. You can try to increase the discretization from quadratic to cubic. This helps sometimes, but of course at the price of higher memory demand and longer computation. Cheers Edgar -- Edgar J. Kaiser emPhys Physical Technology http://www.emphys.com
Aamir Qamar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 19 sept. 2015, 23:20 UTC−4
Thanks kaiser, it worked but is there any other way of solving this because its taking too long and sometimes the system stuck....
Thanks kaiser, it worked but is there any other way of solving this because its taking too long and sometimes the system stuck....
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 20 sept. 2015, 07:44 UTC−4

You can try to reduce the mesh resolution.

--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
You can try to reduce the mesh resolution. -- Edgar J. Kaiser emPhys Physical Technology http://www.emphys.com

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content