Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Natural convection - Transition from laminar to turbulent flow
Posted 1 sept. 2010, 01:58 UTC−4 0 Replies
Please login with a confirmed email address before reporting spam
I am working with natural convection and keep asking myself:
Why do COMSOL define that the transition from laminar to turbulent flow occurs at a Gr value of 10^9 (page 18 of the 3.5a heat transfer module user guide), when one of the books they are refering to on the same page is defining that the transition occurs for an Ra value (Ra = Gr*Pr) of 10^9 (Page 543 of Incropera and DeWitt)?
Support answered that the Pr number in Ra=Gr*Pr corresponded to the turbulent Pr number of value 0.85, and thus assuming that Gr = Ra was not a bad approximation. But why should the turbulent Pr number be used if you are trying to determine if the flow is turbulent or not?
I am working with natural convection in a special oil, which has Pr numbers that are highly dependent on temperature, ranging from 2978 a zero degC to 187 at 60 degC. With such high Pr numbers the two "ways" of determining turbulent flow (Gr>10^9 or Ra>10^9) obiously gives very different results regarding if the flow is to be considered turbulent or not.
Are there any flow experts ot there?
Thanks.
Hello Tore Berge
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.