Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

MATLAB and COMSOL simulation results comparison for single 3D solid

Please login with a confirmed email address before reporting spam

Hello,

I have used the 8 noded 3d solid element to analyze the structure displacements and stresses. My task is to built a FEM program using MATLAB which will give the structure displacements and stresses. I got the results for the displacements exactly as same as COMSOL simulation. But for the stresses (Normal stresses and Shear stresses) my results is not same. My question, when displacement result is exactly same and is it obvious that stresses result should be also same for COMSOL and MATLAB simulation.

Thanks in advance.

0 Replies Last Post 10 sept. 2015, 10:22 UTC−4
COMSOL Moderator

Hello Md Nahidul Islam

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.