Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
AC voltage source
Posted 26 août 2010, 16:18 UTC−4 2 Replies
Please login with a confirmed email address before reporting spam
Hi,
i just started using comsol. Can any body tell me how do i create AC voltage source, or rather apply a sinusoidally varying potential (as a boundary condition) to a surface.
i just started using comsol. Can any body tell me how do i create AC voltage source, or rather apply a sinusoidally varying potential (as a boundary condition) to a surface.
2 Replies Last Post 28 août 2010, 06:27 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
it depends if you want to do time / transient analysis or harmonic analysis (continuous sinus load)
in time transient you must define you voltage or whatever laod as a function of time "t" à la X=X0*sin(2*pi*freq*t)
in harmonic the sin(2*pi*f*t) is assumed defined (harmonic development) so its only the frequenecy "f" you define and the amplitude is given by the external force or voltage (depends on the physiscs choosen)
Check the doc on transient and harmonic solver modes, and the effect on the equations
--
Good luck
Ivar
it depends if you want to do time / transient analysis or harmonic analysis (continuous sinus load)
in time transient you must define you voltage or whatever laod as a function of time "t" à la X=X0*sin(2*pi*freq*t)
in harmonic the sin(2*pi*f*t) is assumed defined (harmonic development) so its only the frequenecy "f" you define and the amplitude is given by the external force or voltage (depends on the physiscs choosen)
Check the doc on transient and harmonic solver modes, and the effect on the equations
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
thanx Ivar. that was helpful.