Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Dimensionless in comsol

Posted 9 juil. 2015, 00:01 UTC−4 Computational Fluid Dynamics (CFD) Version 4.4 3 Replies

Leo Mechelle
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi Everyone,

I have a question about the dimensionless in comsol. If we choose none in unit system and then add module like laminar flow, we need to fill in the density and viscosity in fluid properties. However, the density and viscosity are all in SI unit (default setting). I wonder how to set these two with dimensionless unit instead of the SI unit?
Many THanks!

Best,
Leo
3 Replies Last Post 9 juil. 2015, 06:14 UTC−4
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 9 juil. 2015, 05:01 UTC−4
When you chooce dimensionless form, also units should appear dimensionless, at least with me that happens. But the equation has to be converted dimensionless that you know what you are actually simulating.

Attached one way of doing it; the boundary conditions must then be converted accordingly.

br
Lasse
When you chooce dimensionless form, also units should appear dimensionless, at least with me that happens. But the equation has to be converted dimensionless that you know what you are actually simulating. Attached one way of doing it; the boundary conditions must then be converted accordingly. br Lasse
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 9 juil. 2015, 05:08 UTC−4
Typo: Also pressure nabla should be nabla prime.

With these definitions the coefficients take the value 1.
Typo: Also pressure nabla should be nabla prime. With these definitions the coefficients take the value 1.
Leo Mechelle
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 9 juil. 2015, 06:14 UTC−4
Dear Lasse,

Thank you so much for your reply. My understanding from your advices is that when Comsol solve N-S equations, the quantities should be dimentionless with the use of density and viscosity instead of other values.
Thank you so much!

Best,
Leo
Dear Lasse, Thank you so much for your reply. My understanding from your advices is that when Comsol solve N-S equations, the quantities should be dimentionless with the use of density and viscosity instead of other values. Thank you so much! Best, Leo

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content