Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Why is the result non-symmetric

Posted 4 févr. 2015, 12:41 UTC−5 Fluid & Heat, Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD) Version 5.0 1 Reply

John
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, I made a small change to a bouyancy model online, basically to create a geometry that I thought would be symmetric - along y=0 I put a cold blob on one side and a warm blob on the other side. The COMSOL formulation is using the Boussinesq approximation which (I thought) was "reversible".

But looking at the results, the velocity and temperature are not close to being symmetric. Any thoughts?
1 Reply Last Post 4 févr. 2015, 12:51 UTC−5
John
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 4 févr. 2015, 12:51 UTC−5
Aha. Apparently all I have to do is post and immediately I understand my problem... Please ignore the post.

I now realize that because of the effective "rigidity" of the bounding domain, the cold fluid puts downward pressure on that part of the boundary near the cold blob whereas there is no similarly symmetric response from the warm blob - it just goes up in impeded. So the problem is not symmetric. So neither is the answer.

Oh well. I learned something today :-)


Hi, I made a small change to a bouyancy model online, basically to create a geometry that I thought would be symmetric - along y=0 I put a cold blob on one side and a warm blob on the other side. The COMSOL formulation is using the Boussinesq approximation which (I thought) was "reversible".

But looking at the results, the velocity and temperature are not close to being symmetric. Any thoughts?


Aha. Apparently all I have to do is post and immediately I understand my problem... Please ignore the post. I now realize that because of the effective "rigidity" of the bounding domain, the cold fluid puts downward pressure on that part of the boundary near the cold blob whereas there is no similarly symmetric response from the warm blob - it just goes up in impeded. So the problem is not symmetric. So neither is the answer. Oh well. I learned something today :-) [QUOTE] Hi, I made a small change to a bouyancy model online, basically to create a geometry that I thought would be symmetric - along y=0 I put a cold blob on one side and a warm blob on the other side. The COMSOL formulation is using the Boussinesq approximation which (I thought) was "reversible". But looking at the results, the velocity and temperature are not close to being symmetric. Any thoughts? [/QUOTE]

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content