Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Problem comparing massless and Newtonian particles
Posted 17 nov. 2014, 08:30 UTC−5 Version 4.3 0 Replies
Please login with a confirmed email address before reporting spam
I meet a problem when solving particle tracking in a 2 D fluid flow, using Particle Tracing module. I compare both massless and Newtonian particle tracking models. To test the models, I set a simple 2D geometry (see atached image). Particles are injected from left to right. Regarding Newtonian particles, their diameter is100µm, and their density is the same as the fluid. I set a Drag force on the particles. As the Maximum element size in the mesh is fixed to 10µm, the particle integrate several pixels, and, in this way, their displacement should be different from simple streamlines. But then when I compare the results with massless particles trajectories, it appears that the trajectories from both models are (almost) exactly the same... Yet, closed to the wall, where the velocity is almost zero, the difference between Newtonian and massless particles should be well more significant...
Can you tell me what I missed? Is there any parameters that I have to set to take account the particle diameter on their displacement?
Thanking you in advance,
Regis
Attachments:
Hello Regis Turuban
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.