Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Meshing thin embedded geometry

Posted 30 oct. 2014, 09:04 UTC−4 Geometry, Mesh Version 4.4 6 Replies

Monika Szumilo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am a relative beginner to COMSOL and I am trying to build and mesh a solid block with a shallow indent at the top. I have tried so many configurations (splitting into two layers, sweeping from different sides, etc) but each returns a different error. The problems seems to be the vertical walls of the indent.

Is there any clever way of doing it? I would be very grateful for any suggestions.

Thanks,
Monika
6 Replies Last Post 10 nov. 2014, 03:58 UTC−5
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 31 oct. 2014, 07:34 UTC−4
Could you please show/submit your geometry?

Lasse
Could you please show/submit your geometry? Lasse
Monika Szumilo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 31 oct. 2014, 07:51 UTC−4
Sure. I've tried to do it while submitting but the script seemed to be temporarily not working.

In the end I would like to have a metal thin structure (blue) embedded in a larger substrate (grey).

Thanks,
Monika.
Sure. I've tried to do it while submitting but the script seemed to be temporarily not working. In the end I would like to have a metal thin structure (blue) embedded in a larger substrate (grey). Thanks, Monika.

Attachments:

Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 31 oct. 2014, 08:04 UTC−4
Measures of the geometry?

Measures of the geometry?
Monika Szumilo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 31 oct. 2014, 08:22 UTC−4
Total dimensions (width x depth x height) 2mm x 8mm x 1mm
dimensions of the thin embedded structure: 40um x 4mm x 50nm
Total dimensions (width x depth x height) 2mm x 8mm x 1mm dimensions of the thin embedded structure: 40um x 4mm x 50nm
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 31 oct. 2014, 09:35 UTC−4
Did I understand it correct at all?

Attached my geometry with a mesh.
Did I understand it correct at all? Attached my geometry with a mesh.

Attachments:

Monika Szumilo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 10 nov. 2014, 03:58 UTC−5
Yes! Thank you!
Yes! Thank you!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content