Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

model separate boundary for coils

Posted 17 juil. 2014, 06:06 UTC−4 Version 4.3b, Version 4.4 0 Replies

Noman Nisar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Greetings,
My question is I have modeled a 3d geometry of the motor. I have the stator and on the top of it I have to wound windings. But the point is how to define material domains for it as the stator is made of soft iron and windings are of copper. When i try to add copper material it is "over riding" the soft iron material. also in rotating machinery module I have added "muti-turn coils" also but the point still is how to give materials to the windings. or should I have to create separate domain for windings, if yes then how to model windings in comsol ? thanks
0 Replies Last Post 17 juil. 2014, 06:06 UTC−4
COMSOL Moderator

Hello Noman Nisar

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content