Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Regarding S parameter

Posted 2 mai 2014, 16:47 UTC−4 RF & Microwave Engineering Version 4.4 1 Reply

Sachin Pandure
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hello,
I am working on Patch antenna,i wanted to plot S-parameter Vs frequency plot,how can i plot it.
Kind regards,
Sachin
1 Reply Last Post 2 mai 2014, 17:31 UTC−4
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2 mai 2014, 17:31 UTC−4
Make sure your patch antenna is fed by a port, (by default, port #1) and that the port is turned on. After solving the problem, you'll find that emw.S11 is available as a global variable in the pull-down list for any 1D plot that goes with your solution.
Make sure your patch antenna is fed by a port, (by default, port #1) and that the port is turned on. After solving the problem, you'll find that emw.S11 is available as a global variable in the pull-down list for any 1D plot that goes with your solution.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content