Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
3-D Oxygen permeation model
Posted 1 mai 2014, 14:28 UTC−4 Chemical Reaction Engineering Version 4.3b 2 Replies
Please login with a confirmed email address before reporting spam
Hi,
i'm a Master after Master Program student and i'm trying to solve a problem concerning the permeation of oxygen in a 3-D object where i have an internal gas headspace ("Transport of species concentrated)and other internal water domain(Trassport in species diluited")
The external domains are plastics modelled with a "Flow in porous media".
Now i have set all the model but i have a warning with the geometry imported to CAD model. I have an edge smaller the minimum dimension (also with Extra fine).
Now i found this error:
"Very ill conditioned preconditioner: The relative residual is more than 1000 times larger than the relative tolerance.
What's the problem??Depend on the geometry warning How i could set the solver??
Thanks in advance
i'm a Master after Master Program student and i'm trying to solve a problem concerning the permeation of oxygen in a 3-D object where i have an internal gas headspace ("Transport of species concentrated)and other internal water domain(Trassport in species diluited")
The external domains are plastics modelled with a "Flow in porous media".
Now i have set all the model but i have a warning with the geometry imported to CAD model. I have an edge smaller the minimum dimension (also with Extra fine).
Now i found this error:
"Very ill conditioned preconditioner: The relative residual is more than 1000 times larger than the relative tolerance.
What's the problem??Depend on the geometry warning How i could set the solver??
Thanks in advance
2 Replies Last Post 1 mai 2014, 17:35 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Mario:
It would be useful if you can give us a more detailed description of your model and your solver settings or if you can give us your model file.
Srivatsava
It would be useful if you can give us a more detailed description of your model and your solver settings or if you can give us your model file.
Srivatsava
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Unfortunately the file is too large so i can't attach it.
I hadn't changed the solver parameters but maybe if i changed them i would start the simulation.
So i ask you if changing these parameters like tolerance ecc. i could remove this error.
The model must explain the oxigen permeation through plastic film and then gas and liquid (water).
Like boundary conditions i fixed the continuity ( like pair) in internal domains and on external faces the oxigen ambient concentration.
I hadn't changed the solver parameters but maybe if i changed them i would start the simulation.
So i ask you if changing these parameters like tolerance ecc. i could remove this error.
The model must explain the oxigen permeation through plastic film and then gas and liquid (water).
Like boundary conditions i fixed the continuity ( like pair) in internal domains and on external faces the oxigen ambient concentration.