Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Impedance of corrugated coaxial cable
Posted 25 avr. 2014, 16:08 UTC−4 1 Reply
Please login with a confirmed email address before reporting spam
I need assistance in calculating outer conductor dimensions for a 50 ohm coaxial cable.
center conductor = .188" copper clad aluminum
Vp = .94
there are 7 peaks in 1.211"
we need .040" corrugation depth
what would the peak and valley measurement need to be if .015" thick copper is used as the material for the outer conductor ?
center conductor = .188" copper clad aluminum
Vp = .94
there are 7 peaks in 1.211"
we need .040" corrugation depth
what would the peak and valley measurement need to be if .015" thick copper is used as the material for the outer conductor ?
1 Reply Last Post 25 avr. 2014, 17:20 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Dear Gerald,
You may find this article helpful:
www.comsol.com/blogs/computing-impedance-corrugated-waveguide/
You may find this article helpful:
www.comsol.com/blogs/computing-impedance-corrugated-waveguide/