Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
postprocessing of results
Posted 20 nov. 2013, 08:48 UTC−5 Studies & Solvers Version 4.3b 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I have a working3D Model in Comsol4.3b.
This model gives me the 3D electrig field of an electrode array.
To evaluate this model I want to do some postprocessing im Matlab.
Especially an FFT over the values of a horizontal cut plate through the resulting field.
To do so I saved my model as a m-file and rund this into matlab.
But I did not get how I can access te data of the resulting field to perform my postprocessing eg. fft on the resulting data.
I can plot my data via matlab but I cannot directly access them.
Can anyone give me an hint?
regards Viola
I have a working3D Model in Comsol4.3b.
This model gives me the 3D electrig field of an electrode array.
To evaluate this model I want to do some postprocessing im Matlab.
Especially an FFT over the values of a horizontal cut plate through the resulting field.
To do so I saved my model as a m-file and rund this into matlab.
But I did not get how I can access te data of the resulting field to perform my postprocessing eg. fft on the resulting data.
I can plot my data via matlab but I cannot directly access them.
Can anyone give me an hint?
regards Viola
1 Reply Last Post 25 nov. 2013, 03:51 UTC−5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
please have a look at the LiveLink for MATLAB User's Guide, to be found in your installation directory under "Documentation > LiveLink for MATLAB". Especially the section "Extracting Results" may be of interest for you.
Best Regards
Bettina Schieche
please have a look at the LiveLink for MATLAB User's Guide, to be found in your installation directory under "Documentation > LiveLink for MATLAB". Especially the section "Extracting Results" may be of interest for you.
Best Regards
Bettina Schieche