Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Problem of the two phase flow
Posted 7 nov. 2013, 01:43 UTC−5 Computational Fluid Dynamics (CFD) Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
Hi, I try to do a simple 2D two phase flow model with the laminar two phase level set. I want water from inlet flow through the air phase and then go away from outlet. In the model, I set the square as the water and the big rectangle as the air phase. The interface was set between them. The top edge is inlet and the bottom edge is the outlet. The gravity covers the whole domain. The water should flow away from the outlet, but the program is stuck when the water fall to the bottom and tries to flow away from outlet. I upload my file and anyone can help me solve this problem, really appreciated!
Hello Yanhan Wang
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.