Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Photonic crystal bandgap anaylisis
Posted 24 oct. 2013, 14:29 UTC−4 Wave Optics Version 4.3b 1 Reply
Please login with a confirmed email address before reporting spam
Hello
I found an example on how to calculate the bandgaps of a photonic crystal here:
www.comsol.com/community/forums/general/thread/12046/
The problem is that in the 4.3b version the Wave Optics module implement the Floquet conditions in a different way. So, I'd like to know if there is an example to use Floquet conditions with this module or an equivalent example for that version.
Thank you
I found an example on how to calculate the bandgaps of a photonic crystal here:
www.comsol.com/community/forums/general/thread/12046/
The problem is that in the 4.3b version the Wave Optics module implement the Floquet conditions in a different way. So, I'd like to know if there is an example to use Floquet conditions with this module or an equivalent example for that version.
Thank you
1 Reply Last Post 29 oct. 2013, 18:00 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Please check the following models in the model library for how to use Floquet conditions:
Wave Optics Module->Gratings and Metamaterials->negative refractive index
Wave Optics Module->Verification Models->fresnel equations
Wave Optics Module->Gratings and Metamaterials->negative refractive index
Wave Optics Module->Verification Models->fresnel equations