Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Rotate Model for Contact analysis

Posted 10 juin 2013, 17:41 UTC−4 Structural Mechanics Version 4.3a 0 Replies

Roy Martin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I have a contact model where a spring arm drops into verticle groves on a cylinder. I would like to rotate the cylinder to study the forces and stress on the spring and cylinder as the the cylinder rotates.

My problem is that I can not find a straight forward way to rotate the cylinder in Comsol. Any suggestions?

Thanks
0 Replies Last Post 10 juin 2013, 17:41 UTC−4
COMSOL Moderator

Hello Roy Martin

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content