Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Temperature profile can't be shown
Posted 27 mai 2013, 22:13 UTC−4 Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD) Version 4.3a 0 Replies
Please login with a confirmed email address before reporting spam
In this model, i have 4 combustion reaction and confuse to input equation for heat source in the model.
as i know..heat source equation for each components are :
(HT_CH4*-R_CH4)
(HT_C2H6*-R_C2H6)
(HT_H2*-R_H2)
(HT_CO*-R_CO)
so that, at the heat source, i put the equation :
(HT_CH4*-R_CH4)+(HT_C2H6*-R_C2H6)+(HT_H2*-R_H2)+(HT_CO*-R_CO)
where HT is (example for CH4) : deltaHf_CH4+(hCO2(T[1/K])+2*hH2O(T[1/K]))-(hCO2(298)+2*hH2O(298))
for R_CH4 and other component, im using Eddy Dissipation model.
the problem is : i dont see the profil of temperature. Comsol just shown me the temperature as the initial temperature that i input.
Hope...anyone could help me.
Thankyou
Hello Farah Inayati
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.