Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Error in free convection

Posted 17 mai 2013, 06:34 UTC−4 Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD) Version 3.5a 2 Replies

Francesco Carelli
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am trying to model a natural convection, creating a volume of air around the object i want to simulate.
I didn't have acceptable results, so I'm trying to realize larger volumes or to use alternative shapes for the volume.

But when I do it, and try to simulate i have the following error message that interrupts my simulation:

'Errror 6199
Attempt to evaluate square root of a negative number.
Function sqrt'

how could an enlargement of the geometric dimensions of the volume cause such problem?
2 Replies Last Post 6 juin 2014, 12:01 UTC−4
Francesco Carelli
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21 mai 2013, 04:53 UTC−4
no ideas?

it's really strange, i have always error with larger dimensions, and never when I return to the original ones... maybe with dimensions too large there is an overflow problem?
no ideas? it's really strange, i have always error with larger dimensions, and never when I return to the original ones... maybe with dimensions too large there is an overflow problem?
Fatu Viorel
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 6 juin 2014, 12:01 UTC−4
Hi,

If you are using material properties from library try to modify the presure at rho tab from 'p' to 'p+patm' where the 'patm' you define in constants as the atmospheric presure (101325 Pa).
Do that at both of the phisycs (HT and CFD) if you are using library materials at both modules




All the best,
Viorel
Hi, If you are using material properties from library try to modify the presure at rho tab from 'p' to 'p+patm' where the 'patm' you define in constants as the atmospheric presure (101325 Pa). Do that at both of the phisycs (HT and CFD) if you are using library materials at both modules All the best, Viorel

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content