Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to define a acoustic point source

Posted 23 avr. 2013, 04:16 UTC−4 Acoustics & Vibrations Version 4.3 4 Replies

Tran Quang Dat
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

I have a problem with Comsol. I defined a point source from 1m away from a acoustic lens, but it seems that there is no convergent behind the acoustic lens. Normally, if I use a plane wave as the sound source, the sound can be converged behind the acoustic lens at the focal point.
Does anyone know how to define point sources (2D) in the Acoustic module in COMSOL?

Thanks a lot.
Tran Quang Dat
4 Replies Last Post 28 déc. 2015, 00:27 UTC−5
Tran Quang Dat
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 23 avr. 2013, 20:31 UTC−4
Anyone can help me, please?
Anyone can help me, please?
Sergei Yushanov Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 24 avr. 2013, 08:32 UTC−4
Tran,

To insert acoustic point source, right-click Pressure-Acoustics, Frequency Domain node and select Points>Power Point Source. You can specify point source by power, flow rate, or intensity.

Regards,
Sergei
Tran, To insert acoustic point source, right-click Pressure-Acoustics, Frequency Domain node and select Points>Power Point Source. You can specify point source by power, flow rate, or intensity. Regards, Sergei
Tran Quang Dat
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 25 avr. 2013, 02:40 UTC−4

Tran,

To insert acoustic point source, right-click Pressure-Acoustics, Frequency Domain node and select Points>Power Point Source. You can specify point source by power, flow rate, or intensity.

Regards,
Sergei


Dear Mr Sergei,

Thank you very much for your replying.

Best Regards,

Tran Quang Dat
[QUOTE] Tran, To insert acoustic point source, right-click Pressure-Acoustics, Frequency Domain node and select Points>Power Point Source. You can specify point source by power, flow rate, or intensity. Regards, Sergei [/QUOTE] Dear Mr Sergei, Thank you very much for your replying. Best Regards, Tran Quang Dat
Hari Krishnan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 28 déc. 2015, 00:27 UTC−5
Hello,

I have a question. What if the acoustic point source is radiating a mixture of frequencies. Let the two predominant Fourier components of the frequency spectrum be F1 and F2. How would you model this case?

Your help will be much appreciated.
Thanks!
Hello, I have a question. What if the acoustic point source is radiating a mixture of frequencies. Let the two predominant Fourier components of the frequency spectrum be F1 and F2. How would you model this case? Your help will be much appreciated. Thanks!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content