Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

which kind of solver?

Posted 7 avr. 2013, 07:05 UTC−4 Version 4.3 2 Replies

Aly TU Delft
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,
i am doing some kind of simulation in RF using 4.3 version comsol and the RAM of my computer is about 30G , how to select the best solver to use almost of my RAM to finish the task as faster as possible?
2 Replies Last Post 8 avr. 2013, 05:24 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 avr. 2013, 13:43 UTC−4
Hi

use the default solver,

You might be able to choose a Direct or Lumped approach in stead of separate segregated steps, if this applies to your model

--
Good luck
Ivar
Hi use the default solver, You might be able to choose a Direct or Lumped approach in stead of separate segregated steps, if this applies to your model -- Good luck Ivar
Aly TU Delft
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 8 avr. 2013, 05:24 UTC−4
Thank you Ivar
Thank you Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content