Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Volume at constant temperature
Posted 28 mars 2013, 08:47 UTC−4 Heat Transfer & Phase Change Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Dear all,
I am using the heat transfer module to simulate heat flow through a rod. The rod is connected to a piece of copper that is held at a constant temperature. The problem is that Comsol only gives me the option of selecting surfaces to fix t a constant temperature, and not a volume. Does anyone know how to get around this problem? The rod and copper are joined to eachother with a union.
Thanks
I am using the heat transfer module to simulate heat flow through a rod. The rod is connected to a piece of copper that is held at a constant temperature. The problem is that Comsol only gives me the option of selecting surfaces to fix t a constant temperature, and not a volume. Does anyone know how to get around this problem? The rod and copper are joined to eachother with a union.
Thanks
1 Reply Last Post 28 mars 2013, 16:33 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
If you force a constant temperature over a full domain (volume), you can as well ignore it and force a constant temperature at its interfaces.
Think over it, your copper part interacts with the external temperature over its' boundaries, it's not really physical to impose a constant temperature and then apply a diffusion type equation on the domain, it is about a writing 0=0, not the most useful equation, or ?
--
Good luck
Ivar
If you force a constant temperature over a full domain (volume), you can as well ignore it and force a constant temperature at its interfaces.
Think over it, your copper part interacts with the external temperature over its' boundaries, it's not really physical to impose a constant temperature and then apply a diffusion type equation on the domain, it is about a writing 0=0, not the most useful equation, or ?
--
Good luck
Ivar