Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Extrapolating BH curve & Relative permeability
Posted 14 mars 2013, 13:00 UTC−4 Low-Frequency Electromagnetics, Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
The BH curve from experimental data is normally in the first quadrant.
When I extrapolate using the given methods, the extrapolated BH curve in the 3rd quadrant is unrealistic and am concerned about the -ve values for both H and B.
Am thinking of manually mirroring the data along y = x, i.e. by multiplying with a -1 for the both quantities and then load the data in Comsol, because am not sure what Comsol does with negative B-H quantities.
To set relative permeability, I copied the expression for normB and normH under the property group of BH curve, i.e.
1/mu0_const * BH(normH[m/A])[T] / sqrt(H1^2+H2^2+H3^2)
In addition I disabled the HB curve, to ensure that its only the BH curve that is active during simulations.
I just want to confirm whether I have done the right thing.
Regards
Wanjiku
Hello John Wanjiku
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.