Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Eigenfrequency Problem

Please login with a confirmed email address before reporting spam

Good evening,


I'd like to know if there's a way to find the highest, maximum , eigerfrequency of a structure using COMSOL.

2 Replies Last Post 13 mars 2013, 16:34 UTC−4

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 12 mars 2013, 10:08 UTC−4
Victor,

there is no such thing as a highest eigenfrequency in a mechanical structure, or even any structure that has eigenmodes. The high frequency modes may suffer from strong damping and you must define your criterion for the quality factor of the mode according to your model.

However, there is a lowest eigenfrequency and COMSOL can find it in a eigenmode study.

Cheers
Edgar
Victor, there is no such thing as a highest eigenfrequency in a mechanical structure, or even any structure that has eigenmodes. The high frequency modes may suffer from strong damping and you must define your criterion for the quality factor of the mode according to your model. However, there is a lowest eigenfrequency and COMSOL can find it in a eigenmode study. Cheers Edgar

Nagi Elabbasi Facebook Reality Labs

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 13 mars 2013, 16:34 UTC−4
Victor,

As Edgar pointed out there is no such thing. There is a highest natural frequency for a specific finite element mesh but I doubt that would be useful to you. Such a frequency can be used to determine the maximum stable time step in an explicit analysis.

Nagi Elabbasi
Veryst Engineering
Victor, As Edgar pointed out there is no such thing. There is a highest natural frequency for a specific finite element mesh but I doubt that would be useful to you. Such a frequency can be used to determine the maximum stable time step in an explicit analysis. Nagi Elabbasi Veryst Engineering

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.