Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Undefined value found.

Posted 5 févr. 2013, 21:27 UTC−5 Version 4.3a 4 Replies

Quan Gao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am using poroelasticity module to simulate soil behavior of porous materials, the error information is as follows:

Undefined value found.
- Detail: Undefined value found in the stiffness matrix.
There are 892 equations giving NaN/Inf in the matrix rows for the variable mod1.poro.pw.
at coordinates: (0,0), (0,0.00192308), (0.00125682,0.00130079), (0.00192308,0), (0,0.00384615), ...
There are 3437 equations giving NaN/Inf in the matrix rows for the variable mod1.u.
at coordinates: (0,0), (0,0.000961538), (0,0.00192308), (0.000628409,0.00161194), (0.00125682,0.00130079), ...
There are 3437 equations giving NaN/Inf in the matrix rows for the variable mod1.w.
at coordinates: (0,0), (0,0.000961538), (0,0.00192308), (0.000628409,0.00161194), (0.00125682,0.00130079), ...
and similarly for the degrees of freedom, NaN/Inf in the matrix columns.

Anyone can tell me how should I cope with this error? from what kind of aspects? thanks
4 Replies Last Post 6 févr. 2013, 14:25 UTC−5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 6 févr. 2013, 00:55 UTC−5
Hi

it can come from missing BC, particularly in muiltiphysics cases you need to define ALL the BC for ALL the dependent variables, sometimes these BC appears as duplicates

--
Good luck
Ivar
Hi it can come from missing BC, particularly in muiltiphysics cases you need to define ALL the BC for ALL the dependent variables, sometimes these BC appears as duplicates -- Good luck Ivar
Pu Zhang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 6 févr. 2013, 09:46 UTC−5
Then the duplicates will introduce linear dependent equations?
Then the duplicates will introduce linear dependent equations?
Quan Gao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 6 févr. 2013, 10:23 UTC−5
I have checked the BC for all variables. I dont think some mistake in BC, any other possibilities? thanks
I have checked the BC for all variables. I dont think some mistake in BC, any other possibilities? thanks
Quan Gao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 6 févr. 2013, 14:25 UTC−5
poisson's ratio should not be 0.5
poisson's ratio should not be 0.5

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content