Unable to Select Fluid-Fluid Interface for Free Surface Deformation using Moving Mesh

Please login with a confirmed email address before reporting spam

Hi,

I am trying to simulate the physics model mentioned in the paper whose DOI link is here: https://doi.org/10.1016/j.applthermaleng.2024.122562. Specifically the one in section 2.2 the MHD submodel with the moving mesh for the geometry that I have in my mph file.

I am unable to select the Fluid-Fluid Interface between the air and liquid metal domain. I crosschecked to see if my other boundary conditions match with the one given in Table 1 in the paper and they do. Please let me know if I am missing anything there.

Additionally, utang is the tangential velocity that seems to only appear when I choose RANS model. Is there a possibility of getting it by choosing Laminar Flow and simulating free surface deformation using only the Laminar Flow without additional turbulence modelling.

Any help is much appreciated! Thanks! Maruthi



1 Reply Last Post 30 oct. 2024, 17:56 UTC−4

Please login with a confirmed email address before reporting spam

Posted: 14 hours ago 30 oct. 2024, 17:56 UTC−4

Hi, please let me know if there any suggestions I can implement to solve this.

Also please let me know if there is any other information I can provide for this,

Thanks!

Hi, please let me know if there any suggestions I can implement to solve this. Also please let me know if there is any other information I can provide for this, Thanks!

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.