Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Error: At least two vertices are needed!

Posted 6 déc. 2012, 20:50 UTC−5 Version 4.2 1 Reply

Zahra Mardy
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I have just finished the Geometry part but when I want to go to the Material and define them, I see this error.
In my model I used circles, difference, and polygons. I am not sure which part went wrong!

1 Reply Last Post 7 déc. 2012, 00:51 UTC−5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 déc. 2012, 00:51 UTC−5
Hi

from what you say it's not easy either for us to understand ;) but 2 vertices (points) per line element is a geometrical topological constraint. Maybe the sizes of some of the features is so small compared to the geometry resolution, that COMSOL cannot decompose your geometrical objects into entities for the FEM

--
Good luck
Ivar
Hi from what you say it's not easy either for us to understand ;) but 2 vertices (points) per line element is a geometrical topological constraint. Maybe the sizes of some of the features is so small compared to the geometry resolution, that COMSOL cannot decompose your geometrical objects into entities for the FEM -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content