Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Implementation of an Initial temperature field using a previously obtained temperature field
Posted 6 déc. 2012, 07:02 UTC−5 Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Dear all;
I found that Comsol allows a simple equation for the initial temperature field such as T=sin(xy). But, I can not find how to implement some complicated temperature field as an initial temperature field using a previously obtained temperature field.
Sometimes, you may want to use a result (temperature, velocity vector field, etc.) from previously run experiments. How can I use the temperature and/or velocity vector field as initial temperature/velocity field?
Thank you in advance.
Changyeol
I found that Comsol allows a simple equation for the initial temperature field such as T=sin(xy). But, I can not find how to implement some complicated temperature field as an initial temperature field using a previously obtained temperature field.
Sometimes, you may want to use a result (temperature, velocity vector field, etc.) from previously run experiments. How can I use the temperature and/or velocity vector field as initial temperature/velocity field?
Thank you in advance.
Changyeol
1 Reply Last Post 6 déc. 2012, 08:14 UTC−5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
check the doc for the solver node initial values tab
--
Good luck
Ivar
check the doc for the solver node initial values tab
--
Good luck
Ivar